Installation of Vinyl Flooring Tiles

» Posted by on Feb 13, 2019 in Tiles Installation | 0 comments

A new flooring made of vinyl tile is a very affordable way to enhance the appearance of your room. Even though mainly used in wet and heavy areas such as bathrooms and mud rooms, vinyl tiles can give a significant development to any floor’s appearance which has gone its expiry date. As a matter of fact, the vinyl tiles are very simple and forthright when talking about the installation procedure. People that do DIY can also install their flooring West Palm Beach as well if they will just take their time preparing the layout and flooring. 

The following are some of the steps in the vinyl flooring tile installation: 

  1. Select the Tile to be Used

Vinyl tiles are commonly 12×12 inches in size so every one of them exactly covers 1 square foot of your flooring. The costs range may vary but you expect that the more costly the tile is, the longer it lasts and the better it looks. The better qualities of tiles come with warranties for 15 to 20 years. 

By far, the easiest and fastest vinyl tile installation is the variety of peel and stick. They come with adhesives installed by the maker and all you have to do is just peel the backing paper off and press the tile into the area. In addition to that, there are no oozing glues to be concerned of and there will not be any annoying odor or fumes in your home.  

  1. Measure the Amount of Tile Required

Estimating the number of tiles required to do the project is easy. Calculate the length and width of your room first and then, multiply them all together. 

  1. Prepare Your Flooring for the Vinyl Tile

The vinyl tile may be installed to all underlying surface such as concrete, sheet vinyl or even an existing vinyl, as long as it is in good repair. On the other hand, dips, bumps and cracks will have to be fixed prior to installing the tile. 

Get rid of any trim around the edges of your flooring. If you are installing on the flooring of your bathroom, it will be a good idea to get rid of the toilet first. Bring the new tiles into your house a day prior to planning on doing the procedure so that they will get acclimatized to your house. 

Concrete Floorings 

Patch any cracks or holes and get rid of any ridges or bumps with the use of a heavy grit sandpaper or cold chisel on the belt sander. A speedy sanding of the entire concrete flooring will help the tiles stick onto the surface as well, certainly if the flooring has been painted. 

  1. Plan the Layout

You definitely want to place the vinyl tiles with the design centered on the most attractive portion of the flooring. Following this idea, you use entire tiles in the middle of your flooring and work on the corners where the cut tiles will not be as noticeable. Contact a professional for more important details. 

 

Submit a Comment

Your email address will not be published. Required fields are marked *

*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>